ETHYL 3-(DIPROPYLAMINO)PROPIONATE
Ethyl 3-di-n-propylaminopropionate
CAS: 42980-55-2
Molecular Formula: C11H23NO2
ETHYL 3-(DIPROPYLAMINO)PROPIONATE - Names and Identifiers
| Name | Ethyl 3-di-n-propylaminopropionate |
| Synonyms | ETHYL 3-(DIPROPYLAMINO)PROPIONATE ethyl 3-(dipropylamino)propanoate ethyl N,N-dipropyl-beta-alaninate ETHYL 3-DI-N-PROPYLAMINOPROPIONATE ETHYL-BETA-DIPROPYLAMINOPROPIONATE Ethyl 3-di-n-propylaminopropionate β-Alanine, N,N-dipropyl-, ethyl ester |
| CAS | 42980-55-2 |
| EINECS | 256-034-3 |
| InChI | InChI=1/C11H23NO2/c1-4-8-12(9-5-2)10-7-11(13)14-6-3/h4-10H2,1-3H3 |
ETHYL 3-(DIPROPYLAMINO)PROPIONATE - Physico-chemical Properties
| Molecular Formula | C11H23NO2 |
| Molar Mass | 201.31 |
| Density | 0.911g/cm3 |
| Boling Point | 254.7°C at 760 mmHg |
| Flash Point | 81.4°C |
| Vapor Presure | 0.017mmHg at 25°C |
| Refractive Index | 1.442 |
ETHYL 3-(DIPROPYLAMINO)PROPIONATE - Risk and Safety
| Risk Codes | R36/37/38 - Irritating to eyes, respiratory system and skin. |
| Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36 - Wear suitable protective clothing. |
ETHYL 3-(DIPROPYLAMINO)PROPIONATE - Introduction
Ethyl 3-di-n-propylaminopionate is an organic compound with the chemical structure CH3-CH2-CH(NH-CH2-CH2-CH3)-COOCH2CH3.
Nature:
-Appearance: Ethyl 3-di-n-propylaminopionate is a colorless liquid.
-Density: Its density is 0.867g/cm³.
-Melting point: The melting point of this compound is -63°C.
-Boiling point: Its boiling point is 200-202 ℃.
-Solubility: Ethyl 3-di-n-propylaminopionate is soluble in organic solvents such as alcohols, ethers and amino groups.
Use:
-Chemical reagent: It can be used as a reagent in organic synthesis to prepare other compounds.
-Pharmaceutical intermediates: It can also be used to prepare pharmaceutical intermediates, such as the synthetic intermediates of benazepril (a blood pressure regulating drug).
Preparation Method:
Ethyl 3-di-n-propylaminopionate has many ways to prepare, one of the common methods is:
Reaction of n-propylamine with acetyl chloride under alkaline conditions to generate 3-di-n-propylaminopropionic acid. Then by esterification, 3-di-n-propylaminopropionic acid was reacted with ethanol to give Ethyl 3-di-n-propylaminopionate.
Safety Information:
The following safety precautions should be taken when using this compound:
- Ethyl 3-di-n-propylaminopionate is an irritant substance and may cause irritation in contact with skin and eyes. Wear appropriate protective equipment, such as gloves and goggles.
-Keep away from heat sources and open flames during use and storage to prevent contact with oxidants.
-If there is an accidental leak, take appropriate emergency measures, such as preventing the solution from entering the sewer or water source.
-When using and handling the compound, it should comply with the corresponding safety procedures and strictly follow the relevant safety instructions.
Nature:
-Appearance: Ethyl 3-di-n-propylaminopionate is a colorless liquid.
-Density: Its density is 0.867g/cm³.
-Melting point: The melting point of this compound is -63°C.
-Boiling point: Its boiling point is 200-202 ℃.
-Solubility: Ethyl 3-di-n-propylaminopionate is soluble in organic solvents such as alcohols, ethers and amino groups.
Use:
-Chemical reagent: It can be used as a reagent in organic synthesis to prepare other compounds.
-Pharmaceutical intermediates: It can also be used to prepare pharmaceutical intermediates, such as the synthetic intermediates of benazepril (a blood pressure regulating drug).
Preparation Method:
Ethyl 3-di-n-propylaminopionate has many ways to prepare, one of the common methods is:
Reaction of n-propylamine with acetyl chloride under alkaline conditions to generate 3-di-n-propylaminopropionic acid. Then by esterification, 3-di-n-propylaminopropionic acid was reacted with ethanol to give Ethyl 3-di-n-propylaminopionate.
Safety Information:
The following safety precautions should be taken when using this compound:
- Ethyl 3-di-n-propylaminopionate is an irritant substance and may cause irritation in contact with skin and eyes. Wear appropriate protective equipment, such as gloves and goggles.
-Keep away from heat sources and open flames during use and storage to prevent contact with oxidants.
-If there is an accidental leak, take appropriate emergency measures, such as preventing the solution from entering the sewer or water source.
-When using and handling the compound, it should comply with the corresponding safety procedures and strictly follow the relevant safety instructions.
Last Update：2024-04-09 19:05:49
